Login: Password:   Get Password	European Undermount Drawer Slides with Soft Close Mechanism Undermount European Drawer Slides with Soft Close Mechanism. WITHOUT METAL BRACKET. Rear Holes for European Application. Load Capacity: Dynamic - 75lbs Static - 100lbs NOTE: These slides are NOT meant for retrofit applications. Drawers must be built to accommodate slides as specified below. These slides fit the same drawer size as the Blum Tandem slides. Height: Drawer must be at least 3/4" less than the total cabinet opening height. Width: For 5/8" thick drawers, deduct a total of 3/8" from the cabinet total opening width. For 1/2" thick drawers, deduct a total of 5/8" from cabinet total opening width. Drawer Depth: 15" for 15" slider, 18" for 18" slider and 21" for 21" slider. Screws Sold Separately Flat Head Screw #6 X 5/8" Pack of 100 NOTE: For 15" Slide Minimum Cabinet Depth Must be 16" For 18" Slide Minimum Cabinet Depth Must be 19" For 21" Slide Minimum Cabinet Depth Must be 22" Name Description Part # <10 10+ Qty 15" Slide 15" Undermount European Drawer Slides with Soft Close Mechanism USE15 $19.44 $18.97  18" Slide 18" Undermount European Drawer Slides with Soft Close Mechanism USE18 $20.88 $20.37  21" Slide 21" Undermount European Drawer Slides with Soft Close Mechanism USE21 $22.31 $21.77  Locking Device Locking Device Name Description Part # <10 10+ Qty Locking Device Locking Device Set of Two (2) Left & Right USELR $1.05 $1.00  Flat Head Screw Name Description Part # <10 10+ Qty Flat Head Screw #6 X 1/2" Flat Head Screw #6 X 1/2" Bag of 100 QS1233 $2.39 $2.31  Wood Classic #6 X 5/8" Countersunk Screw #6 X 5/8" Bag of 100 QS9220 $3.21 $3.15  Flat Head Screw #7 X 5/8" Flat Head Screw #7 X 5/8" Bag of 100 QS9223 $3.18 $3.08  NT Rear Mount Socket Rear mount socket for face frame construction using the Mepla-Alfit Dynamic NT drawer slides.   Name Description Part # <10 10+ Qty Sockets NT Rear Mount Sockets Set of Two (2) 7950.VE300 $1.00 $0.95  Universal Bracket Kit Bottom mount installation Includes (4) brackets. Includes (8) M4 screws.   Name Description Part # <10 10+ Qty Universal Bracket Universal Bracket Set of Four (4) B295-400 $7.73 $8.00  Side Spacer For Spacing out Tandem runners from the cabinet side for clearance on interior roll-out trays.   Name Description Part # <10 10+ Qty Side Spacer Tandem Side Spacer -Each B59-357 $0.70 $0.65  Drawer Front Adjusters Kit Drawer Front Adjusters B295.100 20mm Diameter, 10.5mm Drill Depth. Ideal fitting for drawer stacks where drawer alignment is critical. Works with any four-sided drawer, provides adjustment in all directions. Provides an easy drawer alignment without having to adjust the drawer runners. If permanent fastening is required, fasten drawer front to box front with drywall screw from back. Fitting is pressed into bored hole in the back of the drawer front and attached with a standard 8/32 machine screw to the drawer box. Two fittings are recommended for each drawer to allow for adequate adjustments. Sold per each.   Name Description Part # <10 10+ Qty 20 mm Drill Bit 20 mm Drill Bit Each AM203201 $34.10 $33.00  Marking Gauge Marking Gauge Set Of Two ( 2 ) B65.2950 $10.00 $9.75  Drawer Front Adjuster Drawer Front Adjuster-Each B295.100 $0.25 $0.24  Combo Truss Machine Screws #8-32 X 7/8" Drawer Front Adjuster Screws Bag of 100 QS1209 $3.15 $3.05
	Unique Drawer Boxes 9435 Bond Ave. El Cajon, CA 92021 Phone: (619) 873-4240 Fax: (619) 342-9671 Drawer Boxes | Custom Drawer Boxes | Ready Made Drawer Boxes | Drawer Slides | Blum Drawer Slides | Accuride Drawer Slides | Mepla Alfit Drawer Slides